Brodit Proclip | Apple iPhone / iPhone 3G / iPhone 3GS / iPhone 4 Car Holder Mount

Padded. Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

Adjustable holder. Fits devices with skin (NOT for Apple original Bumper). Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of black ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone 4 with skin (does NOT fit for iPhone without skin or with Apple original Bumper.)

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

Fits devices with Apple original Bumper. Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of black ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone 4 with Apple original Bumper (does NOT fit for iPhone without or with skin.)

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

For a more secure upright and horizontal position. Padded. The choice for you who are using your iPhone with navigation and easily want to switch between an upright position and a horizontal position; simply turn the holder into desired position! The holder provides a more secure upright and horizontal position than a standard holder. Safe, comfortable and convenient!

The holder has a neat and discreet design which blends well with the vehicle's interior. When keeping your iPhone in a passive holder, it is always within easy sight and reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. You can attach the cable to the back part of the holder, it will then be easy accessable whenever you want to use it.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

Padded. Fits devices with Apple original Bumper. Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone with Apple original Bumper (does NOT fit for iPhone with skin without skin).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

For Griffin PowerJolt cable. Padded. The choice for you who often connect an Griffin PowerJolt cable to your iPhone. You attach the Griffin-cable to the holder easily. It then connects automatically to the iPhone when you put it in the holder, so you do not have to connect the cable it manually each time.

The holder fits only for the new Griffin PowerJolt cable with release buttons on the sides. Compare the connector in the picture with the connector on your cable in order to find the correct holder. (Cable not included)

Keep your iPhone in a holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

For Griffin PowerJolt cable. Adjustable Holder, fits Devices with Skin (NOT for Apple original Bumper). The choice for you who often connect an Griffin PowerJolt cable to your iPhone. You attach the Griffin-cable to the holder easily. It then connects automatically to the iPhone when you put it in the holder, so you do not have to connect the cable it manually each time.

The holder fits only for the new Griffin PowerJolt cable with release buttons on the sides. Compare the connector in the picture with the connector on your cable in order to find the correct holder. (Cable not included)

Keep your iPhone in a holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

The holder is made of black ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone 4 with skin (does NOT fit for iPhone without skin or with Apple original Bumper.)

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

For use with Parrot MK9000-series. With tilt swivel. Padded. The choice for you who use a Parrot MK9000-series with your iPhone 4. You easily attach the Parrot-cable to the holder. It then connects automatically to the iPhone when you put it in the holder, so you do not have to connect the Parrot cable it manually each time.

The holder fits only for Parrot MK9000-series Compare the connector in the picture with the connector on your cable in order to find the correct holder. (Cable not included)

Keep your iPhone in a holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

Padded. Fits for all cables! A holder that provides a neat, firm installation for many areas of use. All cables that can be used with the iPhone can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the iPhone each time you put it in the holder. (Cable not included)

Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

Adjustable holder. Fits devices with skin (NOT for Apple original Bumper). Fits for all cables! A holder that provides a neat, firm installation for many areas of use. All cables that can be used with the iPhone can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the iPhone each time you put it in the holder. (Cable not included)

Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

The holder is made of ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone with skin (does NOT fit for iPhone without skin or with Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

For a more secure upright and horizontal position. Padded. Fits for all cables! A holder that provides a neat, firm installation for many areas of use. All cables that can be used with the iPhone can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the iPhone each time you put it in the holder. You can run the cable through the back part of the holder for an even cleaner look. (Cable not included)

The choice for you who are using your iPhone with navigation and easily want to switch between an upright position and a horizontal position; simply turn the holder into desired position! The holder provides a more secure upright and horizontal position than a standard holder. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. When keeping your iPhone in a passive holder, it is always within easy sight and reach.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

For a more secure upright and horizontal position. Adjustable holder, fits devices with skins (NOT for Apple Original Bumper). Fits for all cables! A holder that provides a neat, firm installation for many areas of use. All cables that can be used with the iPhone can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the iPhone each time you put it in the holder. You can run the cable through the back part of the holder for an even cleaner look. (Cable not included)

The choice for you who are using your iPhone with navigation and easily want to switch between an upright position and a horizontal position; simply turn the holder into desired position! The holder provides a more secure upright and horizontal position than a standard holder. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. When keeping your iPhone in a passive holder, it is always within easy sight and reach.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone with skin (does NOT fit for iPhone without skin or with Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

With tilt swivel. With USB cable. Apple approved charging cable. Padded. Use an active holder for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

With tilt swivel. With USB cable. Apple approved charging cable. Adjustable holder. Fits devices with skin (NOT for Apple original Bumper). Use an active holder for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.

The holder is made of ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone with skin (does NOT fit for iPhone without skin or with Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

With tilt swivel. With USB cable. Apple approved charging cable. For a more secure upright and horizontal position. Padded. The choice for you who are using your iPhone with navigation and easily want to switch between an upright position and a horizontal position; simply turn the holder into desired position! Use an active holder for your iPhone on the road and you will always have a freshly charged battery. In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior.

The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

With tilt swivel. Padded. Use an active holder for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The active holder is to be connected inside the dashboard. It provides an elegant installation without any cables hanging over the interior. The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

When you place the iPhone in the holder, it automatically connects to the charging unit. 12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. Professional installation recommended.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

With tilt swivel. Adjustable holder, fits devices with skin (NOT for Apple original Bumper). Use an active holder for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The active holder is to be connected inside the dashboard. It provides an elegant installation without any cables hanging over the interior. The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

When you place the iPhone in the holder, it automatically connects to the charging unit. 12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. Professional installation recommended.

The holder is made of black ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone with skin (does NOT fit for iPhone without skin or with Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

With tilt swivel. For a more secure upright and horizontal position. Padded. The choice for you who are using your iPhone with navigation and easily want to switch between an upright position and a horizontal position; simply turn the holder into desired position! Use an active holder for your iPhone on the road and you will always have a freshly charged battery. The active holder is to be connected inside the dashboard. It provides an elegant installation without any cables hanging over the interior. In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior.

When you place the iPhone in the holder, it automatically connects to the charging unit. 12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. Professional installation recommended.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

With Cigarette Lighter Cable and USB Cable. Apple approved cable. Padded Holder. With tilt swivel. 2 keys included. This holder is to be used when you will secure your iPhone and still have it easy accessable. Perfect for use in the car, in stores, at exhibitions and any place where you want to use your iPhone without having it easy removable. In order to remove the unit from the holder you need the key or a certain amount of violence is required. The holder includes a lock and two keys.

The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

For Fixed Installation. Padded. With tilt swivel. 2 keys included. This holder is to be used when you will secure your iPhone and still have it easy accessable. Perfect for use in the car, in stores, at exhibitions and any place where you want to use your iPhone without having it easy removable. In order to remove the unit from the holder you need the key or a certain amount of violence is required. The holder includes a lock and two keys.

When you place the iPhone in the holder, it automatically connects to the charging unit. 12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

Mounting adapter for item no. 215473. Screws included. 50x60x8 mm. Mounting adapter for iPad MultiStand (item no 215473). Is to be used when you want to be able to hang the stand onto more than one place, e.g. onto the kitchen, in the car, in the caravan etc. Screws included. Made of black ABS plastic. Dimensions: 50x60x8 mm.

Multistand demo film

Multistand demo film, Apple iPad 2 version

Mounting adapter for item no. 215462. Screws included. 50x60x8 mm. Mounting adapter for iPad MultiStand (item no 215462). Is to be used when you want to be able to hang the stand onto more than one place, e.g. onto the kitchen, in the car, in the caravan etc. Screws included. Made of White ABS plastic. Dimensions: 50x60x8 mm.

Multistand demo film

Multistand demo film, Apple iPad 2 version

MultiStand. Mounting Adapter and Screws Included. Black. A versatile table stand which is perfect for you who use your iPad in several places. You easily place the iPad in the stand, it is then firmly attached wherever you go! Convenient to use anywhere at home, in the car or in the office.

When using the table stand it is easier to carry the iPad around with you. It diminishes the risk to drop it, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.

You can attach the stand onto a wall, onto a ProClip in the car or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).

You can connect e.g. a charging cable to the iPad when it is in place in the stand, all buttons and connectors are easy accessable. You can easily switch between landscape and portrait mode.

Wall mount. Black. Place your iPad on the wall and you will have it neatly in place where you want to use it! A discreet slim design wall mount for your home, summer house, caravan etc. You can connect e.g. a charging cable to the iPad when it is in the holder.

Keeps your iPad firmly in place. You can easily remove the iPad when you want to use it elsewhere. You can choose to install the mount in portrait or landscape mode. Made of black ABS plastic.

MultiStand. Mounting Adapter and Screws Included. White. A versatile table stand which is perfect for you who use your iPad 2 in several places. You easily place the iPad 2 in the stand, it is then firmly attached wherever you go! Convenient to use anywhere at home, in the car or in the office.

When using the table stand it is easier to carry the iPad 2 around with you. It diminishes the risk to drop it, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of white ABS plastic.

You can attach the stand onto a wall, onto a ProClip in the car or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215475). Color: White.

You can connect e.g. a charging cable to the iPad 2 when it is in place in the stand, all buttons and connectors are easy accessable. You can easily switch between landscape and portrait mode.

Wall mount. White. Place your iPad on the wall and you will have it neatly in place where you want to use it! A discreet slim design wall mount for your home, summer house, caravan etc. You can connect e.g. a charging cable to the iPad when it is in the holder.

Keeps your iPad firmly in place. You can easily remove the iPad when you want to use it elsewhere. You can choose to install the mount in portrait or landscape mode. Made of white ABS plastic.

 With your iPad 2 in a holder attached onto the dashboard you will always have it within easy reach in the car. Safe, neat and convenient! You can connect e.g. a charging cable to the iPad 2 when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad 2 into place in the holder, and to take it with you when leaving the car. Attach onto a ProClip Mounting Platform.

For Apple Composite AV Cable. With tilt swivel. Holder with connector attachment. The choice for you who often connect a connector to your device. The connector is easy to attach to the holder, and then it connectos to the device automatically when you put your device in the holder so you do not have to connect it manually each time. (Connector not included)

The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.

 Fits for all cables! A holder that provides a neat, firm installation for many areas of use. All cables that can be used with the iPad can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the iPad each time you put it in the holder. (Cable not included)

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car. Attach onto a ProClip Mounting Platform.

With tilt swivel. With USB cable. Apple approved charging cable. Use an active holder for your iPad 2 while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation -safe and convenient! The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket. If you have a vehicle with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable which you can connect directly to the USB interface in your vehicle.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad 2 into place in the holder, and to take it with you when leaving the car. Attach onto a ProClip Mounting Platform.

With tilt swivel. 2A charger. Use an active holder for your iPad 2 while driving and you will always have a freshly charged battery! The active holder is to be connected inside the dashboard. It provides a discreet and neat installation without any cables hanging over the interior. Safe and convenient!

12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad 2 into place in the holder, and to take it with you when leaving the car. Attach onto a ProClip Mounting Platform.

With Pass-Through Connector and tilt swivel. 2 keys included. Visible home button. This holder is to be used when you want to secure your iPad and still have it easy accessable. The holder is crashtested and approved for use on Brodit's headrest mount.

The holder is also perfect for use in stores, at exhibitions and any place where you want to use your iPad without having it easy removable. The holder is made of extra strong plastic and is equipped with a lock. In order to remove the iPad from the holder you need the key, two keys are included. The home button is accessible when the iPad is in the holder. All cables that can be used with the iPad can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the iPad each time you put it in the holder. (Cable not included)

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position.

Film Crash test, front crash.

Film Crash test, rear crash.

With Pass-Through Connector and tilt swivel. 2 keys included. Hidden home button. This holder is to be used when you want to secure your iPad and still have it easy accessable. The holder is crashtested and approved for use on Brodit's headrest mount.

The holder is also perfect for use in stores, at exhibitions and any place where you want to use your iPad without having it easy removable. The holder is made of extra strong plastic and is equipped with a lock. In order to remove the iPad from the holder you need the key, two keys are included. The home button is not accessible when the iPad is in the holder. All cables that can be used with the iPad can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the iPad each time you put it in the holder. (Cable not included)

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position.

Film Crash test, front crash.

Film Crash test, rear crash.

Passive holder with tilt swivel. 2 keys included. This holder is to be used when you want to secure your iPad and still have it easy accessable. The holder is crashtested and approved for use on Brodit's headrest mount.

The holder is also perfect for use in stores, at exhibitions and any place where you want to use your iPad without having it easy removable. The holder is made of extra strong plastic and is equipped with a lock. In order to remove the iPad from the holder you need the key, two keys are included. The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position.

Film Crash test, front crash.

Film Crash test, rear crash.

Passive holder with tilt swivel. With spring stud locking. This holder is to be used when you want to have your iPad extra securely in place and still have it easy accessable. The holder is crashtested and approved for use on Brodit's headrest mount.

The holder is made of extra strong plastic and is equipped with a spring stud locking device. The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position.

Film Crash test, front crash.

Film Crash test, rear crash.

Padded. Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

Adjustable holder. Fits devices with skin (NOT for Apple original Bumper). Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of black ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone 4 with skin (does NOT fit for iPhone without skin or with Apple original Bumper.)

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

Fits devices with Apple original Bumper. Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of black ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone 4 with Apple original Bumper (does NOT fit for iPhone without or with skin.)

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

For a more secure upright and horizontal position. Padded. The choice for you who are using your iPhone with navigation and easily want to switch between an upright position and a horizontal position; simply turn the holder into desired position! The holder provides a more secure upright and horizontal position than a standard holder. Safe, comfortable and convenient!

The holder has a neat and discreet design which blends well with the vehicle's interior. When keeping your iPhone in a passive holder, it is always within easy sight and reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. You can attach the cable to the back part of the holder, it will then be easy accessable whenever you want to use it.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

Padded. Fits devices with Apple original Bumper. Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone with Apple original Bumper (does NOT fit for iPhone with skin without skin).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

For Griffin PowerJolt cable. Padded. The choice for you who often connect an Griffin PowerJolt cable to your iPhone. You attach the Griffin-cable to the holder easily. It then connects automatically to the iPhone when you put it in the holder, so you do not have to connect the cable it manually each time.

The holder fits only for the new Griffin PowerJolt cable with release buttons on the sides. Compare the connector in the picture with the connector on your cable in order to find the correct holder. (Cable not included)

Keep your iPhone in a holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

For Griffin PowerJolt cable. Adjustable Holder, fits Devices with Skin (NOT for Apple original Bumper). The choice for you who often connect an Griffin PowerJolt cable to your iPhone. You attach the Griffin-cable to the holder easily. It then connects automatically to the iPhone when you put it in the holder, so you do not have to connect the cable it manually each time.

The holder fits only for the new Griffin PowerJolt cable with release buttons on the sides. Compare the connector in the picture with the connector on your cable in order to find the correct holder. (Cable not included)

Keep your iPhone in a holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

The holder is made of black ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone 4 with skin (does NOT fit for iPhone without skin or with Apple original Bumper.)

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

For use with Parrot MK9000-series. With tilt swivel. Padded. The choice for you who use a Parrot MK9000-series with your iPhone 4. You easily attach the Parrot-cable to the holder. It then connects automatically to the iPhone when you put it in the holder, so you do not have to connect the Parrot cable it manually each time.

The holder fits only for Parrot MK9000-series Compare the connector in the picture with the connector on your cable in order to find the correct holder. (Cable not included)

Keep your iPhone in a holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

Padded. Fits for all cables! A holder that provides a neat, firm installation for many areas of use. All cables that can be used with the iPhone can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the iPhone each time you put it in the holder. (Cable not included)

Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

Adjustable holder. Fits devices with skin (NOT for Apple original Bumper). Fits for all cables! A holder that provides a neat, firm installation for many areas of use. All cables that can be used with the iPhone can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the iPhone each time you put it in the holder. (Cable not included)

Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

The holder is made of ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone with skin (does NOT fit for iPhone without skin or with Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

For a more secure upright and horizontal position. Padded. Fits for all cables! A holder that provides a neat, firm installation for many areas of use. All cables that can be used with the iPhone can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the iPhone each time you put it in the holder. You can run the cable through the back part of the holder for an even cleaner look. (Cable not included)

The choice for you who are using your iPhone with navigation and easily want to switch between an upright position and a horizontal position; simply turn the holder into desired position! The holder provides a more secure upright and horizontal position than a standard holder. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. When keeping your iPhone in a passive holder, it is always within easy sight and reach.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

For a more secure upright and horizontal position. Adjustable holder, fits devices with skins (NOT for Apple Original Bumper). Fits for all cables! A holder that provides a neat, firm installation for many areas of use. All cables that can be used with the iPhone can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the iPhone each time you put it in the holder. You can run the cable through the back part of the holder for an even cleaner look. (Cable not included)

The choice for you who are using your iPhone with navigation and easily want to switch between an upright position and a horizontal position; simply turn the holder into desired position! The holder provides a more secure upright and horizontal position than a standard holder. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. When keeping your iPhone in a passive holder, it is always within easy sight and reach.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone with skin (does NOT fit for iPhone without skin or with Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

With tilt swivel. With USB cable. Apple approved charging cable. Padded. Use an active holder for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

With tilt swivel. With USB cable. Apple approved charging cable. Adjustable holder. Fits devices with skin (NOT for Apple original Bumper). Use an active holder for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.

The holder is made of ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone with skin (does NOT fit for iPhone without skin or with Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

With tilt swivel. With USB cable. Apple approved charging cable. For a more secure upright and horizontal position. Padded. The choice for you who are using your iPhone with navigation and easily want to switch between an upright position and a horizontal position; simply turn the holder into desired position! Use an active holder for your iPhone on the road and you will always have a freshly charged battery. In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior.

The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

With tilt swivel. Padded. Use an active holder for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The active holder is to be connected inside the dashboard. It provides an elegant installation without any cables hanging over the interior. The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

When you place the iPhone in the holder, it automatically connects to the charging unit. 12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. Professional installation recommended.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

With tilt swivel. Adjustable holder, fits devices with skin (NOT for Apple original Bumper). Use an active holder for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The active holder is to be connected inside the dashboard. It provides an elegant installation without any cables hanging over the interior. The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

When you place the iPhone in the holder, it automatically connects to the charging unit. 12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. Professional installation recommended.

The holder is made of black ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone with skin (does NOT fit for iPhone without skin or with Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

With tilt swivel. For a more secure upright and horizontal position. Padded. The choice for you who are using your iPhone with navigation and easily want to switch between an upright position and a horizontal position; simply turn the holder into desired position! Use an active holder for your iPhone on the road and you will always have a freshly charged battery. The active holder is to be connected inside the dashboard. It provides an elegant installation without any cables hanging over the interior. In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior.

When you place the iPhone in the holder, it automatically connects to the charging unit. 12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. Professional installation recommended.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

With Cigarette Lighter Cable and USB Cable. Apple approved cable. Padded Holder. With tilt swivel. 2 keys included. This holder is to be used when you will secure your iPhone and still have it easy accessable. Perfect for use in the car, in stores, at exhibitions and any place where you want to use your iPhone without having it easy removable. In order to remove the unit from the holder you need the key or a certain amount of violence is required. The holder includes a lock and two keys.

The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

For Fixed Installation. Padded. With tilt swivel. 2 keys included. This holder is to be used when you will secure your iPhone and still have it easy accessable. Perfect for use in the car, in stores, at exhibitions and any place where you want to use your iPhone without having it easy removable. In order to remove the unit from the holder you need the key or a certain amount of violence is required. The holder includes a lock and two keys.

When you place the iPhone in the holder, it automatically connects to the charging unit. 12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

Wall mount. White. Place your iPad on the wall and you will have it neatly in place where you want to use it! A discreet slim design wall mount for your home, summer house, caravan etc. You can connect e.g. a charging cable to the iPad when it is in the holder.

Keeps your iPad firmly in place. You can easily remove the iPad when you want to use it elsewhere. You can choose to install the mount in portrait or landscape mode. Made of white ABS plastic.

Wall mount. Black. Place your iPad on the wall and you will have it neatly in place where you want to use it! A discreet slim design wall mount for your home, summer house, caravan etc. You can connect e.g. a charging cable to the iPad when it is in the holder.

Keeps your iPad firmly in place. You can easily remove the iPad when you want to use it elsewhere. You can choose to install the mount in portrait or landscape mode. Made of black ABS plastic.

NOT for model with built-in monitor in headrest. The choice for you who use your iPad in the back seat of a car. The iPad mount is placed onto a front seat's headrest. The installation is quick and easy, no special tools are required and the interior will not be damaged. You can connect e.g. a charging cable to the iPad when it is in the holder.

The mount is equipped with a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

 The choice for you who use your iPad in the back seat of a car. The iPad mount is placed onto a front seat's headrest. The installation is quick and easy, no special tools are required and the interior will not be damaged. You can connect e.g. a charging cable to the iPad when it is in the holder.

The mount is equipped with a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

The headrest mount fits a number of vehicles. Measure the headrest in you vehicle. If the following specifications match your measurements, this product will fit your vehicle:
Minimum inner distance between the headrest bars: 95 mm
Maximum outer distance between the headrest bars: 211 mm

 The choice for you who want to have your iPad in a table stand, offering a convenient solution and which does not take much space. The iPad is easy to place in the table stand, and can be used both in portrait and landscape mode.

MultiStand. Mounting adapter and screws included. A versatile table stand which is perfect for you who use your iPad in several places. You easily place the iPad in the stand, it is then firmly attached wherever you go! Convenient to use anywhere at home, in the car or in the office.

When using the table stand it is easier to carry the iPad around with you. It diminishes the risk to drop it, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap.

You can also attach the stand onto a wall, onto a ProClip in the car or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).

You can connect e.g. a charging cable to the iPad when it is in place in the stand, all buttons and connectors are easy accessable. The iPad is used in landscape mode in the stand.

View the iPad MultiStand video
Apple iPad Version video

Mounting adapter for item no. 215473. Screws included. 50x60x8 mm. Mounting adapter for iPad MultiStand (item no 215473). Is to be used when you want to be able to hang the stand onto more than one place, e.g. onto the kitchen, in the car, in the caravan etc. Screws included. Made of black ABS plastic. Dimensions: 50x60x8 mm.

Multistand demo film

Multistand demo film, Apple iPad version

MultiStand. Mounting Adapter and Screws Included. White. A versatile table stand which is perfect for you who use your iPad in several places. You easily place the iPad in the stand, it is then firmly attached wherever you go! Convenient to use anywhere at home, in the car or in the office.

When using the table stand it is easier to carry the iPad around with you. It diminishes the risk to drop it, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap.

You can attach the stand onto a wall, onto a ProClip in the car or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215475). Color: White.

You can connect e.g. a charging cable to the iPad when it is in place in the stand, all buttons and connectors are easy accessable. You can easily switch between landscape and portrait mode.

Multistand demo film

Multistand demo film, Apple iPad version

MultiStand. Mounting Adapter and Screws Included. Black. A versatile table stand which is perfect for you who use your iPad in several places. You easily place the iPad in the stand, it is then firmly attached wherever you go! Convenient to use anywhere at home, in the car or in the office.

When using the table stand it is easier to carry the iPad around with you. It diminishes the risk to drop it, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap.

You can attach the stand onto a wall, onto a ProClip in the car or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).

You can connect e.g. a charging cable to the iPad when it is in place in the stand, all buttons and connectors are easy accessable. You can easily switch between landscape and portrait mode.

Multistand demo film

Multistand demo film, Apple iPad version

Mounting adapter for item no. 215462. Screws included. 50x60x8 mm. Mounting adapter for iPad MultiStand (item no 215462). Is to be used when you want to be able to hang the stand onto more than one place, e.g. onto the kitchen, in the car, in the caravan etc. Screws included. Made of White ABS plastic. Dimensions: 50x60x8 mm.

Multistand demo film

Multistand demo film, Apple iPad version

For a more secure upright and horizontal position. Padded. This is the choice for you who are using your iPhone with navigation and easily want to switch between an upright position and a horizontal position - simply turn the holder into desired position. When installing, place the holder in the desired position (upright/horizontal) that you will be using as standard. The holder provides a more secure upright and horizontal position than a standard holder.

When keeping your iPhone in a passive holder, it is always within easy sight and reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. You can attach the cable to the holder, it will then be easy accessable whenever you want to use it. (Cable not included)

The passive holder is attached to a tilt swivel, this means you can adjust the angle of the device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

For a more secure upright and horizontal position. Padded. This is the choice for you who are using your iPhone with navigation and easily want to switch between an upright position and a horizontal position - simply turn the holder into desired position. When installing, place the holder in the desired position (upright/horizontal) that you will be using as standard. The holder provides a more secure upright and horizontal position than a standard holder.

When keeping your iPhone in a passive holder, it is always within easy sight and reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. You can attach the cable to the holder, it will then be easy accessable whenever you want to use it. (Cable not included)

The passive holder is attached to a tilt swivel, this means you can adjust the angle of the device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

 With your iPad in a holder attached onto the dashboard you will always have it within easy reach in the car. Safe, neat and convenient! You can connect e.g. a charging cable to the iPad when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car. Attach onto a ProClip Mounting Platform.

With locking. Is to be used when you will secure your iPad and still have it easy accessable. Perfect for use in stores, at exhibitions and any place where you want to use your iPad without having it easy removable. In order to remove the iPad from the holder a screwdriver or a certain amount of violence is required.

You can connect e.g. a charging cable to the iPad when it is in the holder. The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position.

For Griffin PowerJolt cable. Padded. Holder with cable plug attachment. The cable is easy to attach to the holder, and then the cable connects to the phone automatically when you put your unit in the holder so you do not have to connect it manually each time. (Cable not included).

Only for the new Griffin PowerJolt cable without release buttons on the side.

Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.

For Griffin PowerJolt cable. Padded. Holder with cable plug attachment. The cable is easy to attach to the holder, and then the cable connects to the phone automatically when you put your unit in the holder so you do not have to connect it manually each time. (Cable not included).

Only for the new Griffin PowerJolt cable without release buttons on the side.

Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.

For Griffin PowerJolt cable. Adjustable holder, fits devices with skins. Holder with connector attachment. The choice for you who often connect a connector to your device. The connector is easy to attach to the holder, and then it connects to the device automatically when you put your device in the holder so you do not have to connect it manually each time. (Connector not included)

Only for the new Griffin PowerJolt cable without release buttons on the side.

Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.

For Griffin PowerJolt cable. Adjustable holder, fits devices with skins. Holder with connector attachment. The choice for you who often connect a connector to your device. The connector is easy to attach to the holder, and then it connects to the device automatically when you put your device in the holder so you do not have to connect it manually each time. (Connector not included)

Only for the new Griffin PowerJolt cable without release buttons on the side.

Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.

For Apple original Cable (Short). With tilt swivel. The choice for you who often connect an Apple original cable (with thin plug) to your iPad. The connector is easy to attach to the holder. It then connects automatically to the iPad when you put it in the holder, so you do not have to connect the cable it manually each time.

Compare the connector in the picture with the connector on your cable in order to find the correct holder. (Cable not included)

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car. Attach onto a ProClip Mounting Platform.

For Apple Composite AV Cable. With tilt swivel. Holder with connector attachment. The choice for you who often connect a connector to your device. The connector is easy to attach to the holder, and then it connectos to the device automatically when you put your device in the holder so you do not have to connect it manually each time. (Connector not included)

The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.

For a more secure upright and horizontal position. Padded. This is the choice for you who are using your iPhone with navigation and easily want to switch between an upright position and a horizontal position - simply turn the holder into desired position. When installing, place the holder in the desired position (upright/horizontal) that you will be using as standard. The holder provides a more secure upright and horizontal position than a standard holder.

The holder is equipped with a pass-through connector. This means that all cables that can be used with the iPhone can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each time you put the iPhone in the holder. You can run the cable through the back part of the holder for a cleaner look. (Cable not included) This holder provides a more secure upright and horizontal position than a standard holder with pass-through connector.

The holder is attached to a tilt swivel, this means you can adjust the angle of the device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

For a more secure upright and horizontal position. Padded. This is the choice for you who are using your iPhone with navigation and easily want to switch between an upright position and a horizontal position - simply turn the holder into desired position. When installing, place the holder in the desired position (upright/horizontal) that you will be using as standard. The holder provides a more secure upright and horizontal position than a standard holder.

The holder is equipped with a pass-through connector. This means that all cables that can be used with the iPhone can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each time you put the iPhone in the holder. You can run the cable through the back part of the holder for a cleaner look. (Cable not included) This holder provides a more secure upright and horizontal position than a standard holder with pass-through connector.

The holder is attached to a tilt swivel, this means you can adjust the angle of the device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

For a more secure upright and horizontal position. Adjustable holder, fits devices with skins. This is the choice for you who are using your iPhone with navigation and easily want to switch between an upright position and a horizontal position - simply turn the holder into desired position. When installing, place the holder in the desired position (upright/horizontal) that you will be using as standard. The holder is adjustable and fits devices with skins. The holder provides a more secure upright and horizontal position than a standard holder.

The holder is equipped with a pass-through connector. This means that all cables that can be used with the iPhone can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each time you put the iPhone in the holder. You can run the cable through the back part of the holder for a cleaner look. (Cable not included)

The holder is attached to a tilt swivel, this means you can adjust the angle of the device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

For a more secure upright and horizontal position. Adjustable holder, fits devices with skins. This is the choice for you who are using your iPhone with navigation and easily want to switch between an upright position and a horizontal position - simply turn the holder into desired position. When installing, place the holder in the desired position (upright/horizontal) that you will be using as standard. The holder is adjustable and fits devices with skins. The holder provides a more secure upright and horizontal position than a standard holder.

The holder is equipped with a pass-through connector. This means that all cables that can be used with the iPhone can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each time you put the iPhone in the holder. You can run the cable through the back part of the holder for a cleaner look. (Cable not included)

The holder is attached to a tilt swivel, this means you can adjust the angle of the device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

 Fits for all cables! A holder that provides a neat, firm installation for many areas of use. All cables that can be used with the iPad can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the iPad each time you put it in the holder. (Cable not included)

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car. Attach onto a ProClip Mounting Platform.

With Cigarette Lighter Cable and USB Cable. Apple approved cable. For a more secure upright and horizontal position. Padded. This is the choice for you who are using your iPhone with navigation and easily want to switch between an upright position and a horizontal position - simply turn the holder into desired position. When installing, place the holder in the desired position (upright/horizontal) that you will be using as standard. The holder provides a more secure upright and horizontal position than a standard holder. By using an active holder you will always have a fully charged battery. The holder provides a neat and easy installation and the fact that the cable exits from the cab gives a cleaner look. The holder also provides a more secure upright and horizontal position than a standard active holder.

The active holder comes with a USB plug at the end of the cable, which is plugged into a power adapter for connection to the vehicle's 12 Volt socket. If you have a vehicle with USB stereo interface you can disconnect the power adapter and connect holder USB plug directly to the stereo USB port for charging and playing music from the iPhone.

Your iPhone automatically connects to the charging connector every time you dock it in the holder. The active holder is equipped with an Apple-approved cable from Griffin (PowerJolt). The active holder is attached to a tilt swivel, which means you can adjust the angle of the device for better viewing and to avoid light reflection on the screen.

With Cigarette Lighter Cable and USB Cable. Apple approved cable. For a more secure upright and horizontal position. Padded. This is the choice for you who are using your iPhone with navigation and easily want to switch between an upright position and a horizontal position - simply turn the holder into desired position. When installing, place the holder in the desired position (upright/horizontal) that you will be using as standard. The holder provides a more secure upright and horizontal position than a standard holder. By using an active holder you will always have a fully charged battery. The holder provides a neat and easy installation and the fact that the cable exits from the cab gives a cleaner look. The holder also provides a more secure upright and horizontal position than a standard active holder.

The active holder comes with a USB plug at the end of the cable, which is plugged into a power adapter for connection to the vehicle's 12 Volt socket. If you have a vehicle with USB stereo interface you can disconnect the power adapter and connect holder USB plug directly to the stereo USB port for charging and playing music from the iPhone.

Your iPhone automatically connects to the charging connector every time you dock it in the holder. The active holder is equipped with an Apple-approved cable from Griffin (PowerJolt). The active holder is attached to a tilt swivel, which means you can adjust the angle of the device for better viewing and to avoid light reflection on the screen.

With tilt swivel. With USB cable. Apple approved charging cable. Apple approved cable. Adjustable holder, fits devices with skins. Use an active holder for your iPhone while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation -safe and convenient! The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket. If you have a car with USB interface you can disconnect the cig-plug from the holder's cable in order to get a USB-cable which you can connect directly to the USB connector in your vehicle.

The device automatically connects to the charging device every time you put it in the holder. The active holder is equipped with an Apple-approved cable from Griffin (PowerJolt). The active holder is attached to a tilt swivel, this means you can adjust the angle of the device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

With tilt swivel. With USB cable. Apple approved charging cable. Apple approved cable. Adjustable holder, fits devices with skins. Use an active holder for your iPhone while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation -safe and convenient! The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket. If you have a car with USB interface you can disconnect the cig-plug from the holder's cable in order to get a USB-cable which you can connect directly to the USB connector in your vehicle.

The device automatically connects to the charging device every time you put it in the holder. The active holder is equipped with an Apple-approved cable from Griffin (PowerJolt). The active holder is attached to a tilt swivel, this means you can adjust the angle of the device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

With tilt swivel. With USB cable. Apple approved charging cable. Use an active holder for your iPad while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation -safe and convenient! The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket. If you have a vehicle with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable which you can connect directly to the USB interface in your vehicle.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car. Attach onto a ProClip Mounting Platform.

With tilt swivel. 2A charger. For a more secure upright and horizontal position. Padded. The choice for you who want to have your device within easy reach, attached by the dashboard instead of on the windshield mount, giving you clear sight. Active holder for fixed installation. Gives a neat installation without loose cables hanging over the interior. You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen.

Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12/24 Volt.

When installing, place the holder in the desired position (upright/horizontal) that you will be using as standard. The holder provides a more secure upright and horizontal position than a standard holder.

Attach onto ProClip Mounting Platform.

With tilt swivel. 2A charger. For a more secure upright and horizontal position. Padded. The choice for you who want to have your device within easy reach, attached by the dashboard instead of on the windshield mount, giving you clear sight. Active holder for fixed installation. Gives a neat installation without loose cables hanging over the interior. You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen.

Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12/24 Volt.

When installing, place the holder in the desired position (upright/horizontal) that you will be using as standard. The holder provides a more secure upright and horizontal position than a standard holder.

Attach onto ProClip Mounting Platform.

With tilt swivel. 2A charger. Adjustable holder, fits devices with skins. The choice for you who want to have your device within easy reach, attached by the dashboard instead of on the windshield mount, giving you clear sight. Active holder for fixed installation. Gives a neat installation without loose cables hanging over the interior. You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen.

Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12/24 Volt. Attach onto ProClip Mounting Platform.

With tilt swivel. 2A charger. Adjustable holder, fits devices with skins. The choice for you who want to have your device within easy reach, attached by the dashboard instead of on the windshield mount, giving you clear sight. Active holder for fixed installation. Gives a neat installation without loose cables hanging over the interior. You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen.

Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12/24 Volt. Attach onto ProClip Mounting Platform.

With tilt swivel. 2A charger. Padded. The choice for you who want to have your device within easy reach, attached by the dashboard instead of on the windshield mount, giving you clear sight. Active holder for fixed installation. Gives a neat installation without loose cables hanging over the interior. You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen.

Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12/24 Volt. Attach onto ProClip Mounting Platform.

With tilt swivel. 2A charger. Padded. The choice for you who want to have your device within easy reach, attached by the dashboard instead of on the windshield mount, giving you clear sight. Active holder for fixed installation. Gives a neat installation without loose cables hanging over the interior. You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen.

Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12/24 Volt. Attach onto ProClip Mounting Platform.

With tilt swivel. 2A charger. Use an active holder for your iPad while driving and you will always have a freshly charged battery! The active holder is to be connected inside the dashboard. It provides a discreet and neat installation without any cables hanging over the interior. Safe and convenient!

12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car. Attach onto a ProClip Mounting Platform.

Tilt swivel mount. For TomTom Car Kit. The choice for you who want to have your TomTom Car Kit device installed in a neat and safe way! within comfortable reach, attached onto the dashboard instead of the windshield providing you clear sight.

You can easily take the device with you when leaving the vehicle. The holders can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

Tilt swivel mount. For TomTom Car Kit. The choice for you who want to have your TomTom Car Kit device installed in a neat and safe way! within comfortable reach, attached onto the dashboard instead of the windshield providing you clear sight.

You can easily take the device with you when leaving the vehicle. The holders can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

With Pass-Through Connector and tilt swivel. 2 keys included. Visible home button. This holder is to be used when you will secure your iPad and still have it easy accessable. Perfect for use in stores, at exhibitions and any place where you want to use your iPad without having it easy removable. In order to remove the iPad from the holder you need the key or a certain amount of violence is required. The holder includes a lock and two keys. The home button is accessible when the iPad is in the holder.

All cables that can be used with the iPad can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the iPad each time you put it in the holder. (Cable not included)

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. Attach onto a ProClip Mounting Platform.

With Pass-Through Connector and tilt swivel. 2 keys included. Hidden home button. This holder is to be used when you will secure your iPad and still have it easy accessable. Perfect for use in stores, at exhibitions and any place where you want to use your iPad without having it easy removable. In order to remove the iPad from the holder you need the key or a certain amount of violence is required. The holder includes a lock and two keys. The home button is not accessible when the iPad is in the holder.

All cables that can be used with the iPad can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the iPad each time you put it in the holder. (Cable not included)

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. Attach onto a ProClip Mounting Platform.

Passive holder with tilt swivel. 2 keys included. This holder is to be used when you want to secure your iPad and still have it easy accessable. The holder is crashtested and approved for use on Brodit's headrest mount.

The holder is also perfect for use in stores, at exhibitions and any place where you want to use your iPad without having it easy removable. The holder is made of extra strong plastic and is equipped with a lock. In order to remove the iPad from the holder you need the key, two keys are included. The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position.

Film Crash test, front crash.

Film Crash Test of similar holder, rear crash.

Passive holder with tilt swivel. With spring stud locking. This holder is to be used when you want to have your iPad extra securely in place and still have it easy accessable. The holder is crashtested and approved for use on Brodit's headrest mount.

The holder is made of extra strong plastic and is equipped with a spring stud locking device. The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position.

Film Crash test, front crash.

Film Crash test, rear crash.

For Apple iPad. The choice for you who use your iPad in the back seat of a car. The iPad mount is placed onto a front seat's headrest. The installation is quick and easy, no special tools are required and the interior will not be damaged. You can connect e.g. a charging cable to the iPad when it is in the holder.

The mount is equipped with a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

The headrest mount fits a number of vehicles. Measure the headrest in you vehicle. If the following specifications match your measurements, this product will fit your vehicle:
Minimum inner distance between the headrest bars: 95 mm
Maximum outer distance between the headrest bars: 155 mm

For Apple iPad. The choice for you who use your iPad in the back seat of a car. The iPad mount is placed onto a front seat's headrest. The installation is quick and easy, no special tools are required and the interior will not be damaged. You can connect e.g. a charging cable to the iPad when it is in the holder.

The mount is equipped with a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

The headrest mount fits a number of vehicles. Measure the headrest in you vehicle. If the following specifications match your measurements, this product will fit your vehicle:
Minimum inner distance between the headrest bars: 123 mm
Maximum outer distance between the headrest bars: 183 mm

For Apple iPad. The choice for you who use your iPad in the back seat of a car. The iPad mount is placed onto a front seat's headrest. The installation is quick and easy, no special tools are required and the interior will not be damaged. You can connect e.g. a charging cable to the iPad when it is in the holder.

The mount is equipped with a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

The headrest mount fits a number of vehicles. Measure the headrest in you vehicle. If the following specifications match your measurements, this product will fit your vehicle:
Minimum inner distance between the headrest bars: 151 mm
Maximum outer distance between the headrest bars: 211 mm

NOT for model with built-in monitor in headrest. For Apple iPad. The choice for you who use your iPad in the back seat of a car. The iPad mount is placed onto a front seat's headrest. The installation is quick and easy, no special tools are required and the interior will not be damaged. You can connect e.g. a charging cable to the iPad when it is in the holder.

The mount is equipped with a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car. .

 The choice for you who use your iPad in the back seat of a car. The iPad mount is placed onto a front seat's headrest. The installation is quick and easy, no special tools are required and the interior will not be damaged. You can connect e.g. a charging cable to the iPad when it is in the holder.

The mount is equipped with a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

The headrest mount fits a number of vehicles. Measure the headrest in you vehicle. If the following specifications match your measurements, this product will fit your vehicle:
Minimum inner distance between the headrest bars: 95 mm
Maximum outer distance between the headrest bars: 211 mm

For Apple iPad. The choice for you who use your iPad in the back seat of a car. The iPad mount is placed onto a front seat's headrest. The installation is quick and easy, no special tools are required and the interior will not be damaged. You can connect e.g. a charging cable to the iPad when it is in the holder.

The mount is equipped with a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

For Apple iPad. The choice for you who use your iPad in the back seat of a car. The iPad mount is placed onto a front seat's headrest. The installation is quick and easy, no special tools are required and the interior will not be damaged. You can connect e.g. a charging cable to the iPad when it is in the holder.

The mount is equipped with a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car. .

 When keeping your Apple iPhone in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the Apple iPhone when it is in the holder. Attach onto a ProClip Mounting Platform.

Padded. When keeping your Apple iPhone in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the Apple iPhone when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

Adjustable holder, fits devices with skins. With your iPhone in a holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the iPhone in the holder, and to take it out of the holder. Attach onto a ProClip Mounting Platform.

Adjustable holder, fits devices with skins. With your iPhone in a holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the iPhone in the holder, and to take it out of the holder. Attach onto a ProClip Mounting Platform.

Adjustable holder, fits devices with skins. With your iPhone in a holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the iPhone in the holder, and to take it out of the holder. Attach onto a ProClip Mounting Platform.

Padded. When keeping your Apple iPhone 3GS in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the Apple iPhone 3GS when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

Padded. When keeping your Apple iPhone 3G in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the Apple iPhone 3G when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

With tilt swivel. With USB cable. Apple approved charging cable. Padded. Use an active holder for your iPhone while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation -safe and convenient! The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket. If you have a car with USB interface you can disconnect the cig-plug from the holder's cable in order to get a USB-cable which you can connect directly to the USB connector in your vehicle.

The device automatically connects to the charging device every time you put it in the holder. The active holder is equipped with an Apple-approved cable from Griffin (PowerJolt). The active holder is attached to a tilt swivel, this means you can adjust the angle of the device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

With tilt swivel. With USB cable. Apple approved charging cable. Padded. Use an active holder for your iPhone while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation -safe and convenient! The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket. If you have a car with USB interface you can disconnect the cig-plug from the holder's cable in order to get a USB-cable which you can connect directly to the USB connector in your vehicle.

The device automatically connects to the charging device every time you put it in the holder. The active holder is equipped with an Apple-approved cable from Griffin (PowerJolt). The active holder is attached to a tilt swivel, this means you can adjust the angle of the device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

For after-market cable. With tilt swivel. With plush coating. Holder with cable plug attachment. The cable is easy to attach to the holder, and then the cable connects to the Apple iPhone automatically when you put your Apple iPhone in the holder so you do not have to connect it manually each time. (Cable not included). Please compare the connector on the picture so you know you will get the correct holder for your cable.

The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.